Van Blanc―the foreplay

This is the story of my second campervan conversion. My first conversion, now known as Black Beauty, was a VW Transporter 4MOTION DSG. You can read about that conversion here. The YouTubes I watched to learn about techniques I used in that first conversion had the dangerous effect of giving me an appetite for a bigger conversion and my son had a LWB VW Crafter sitting in a field with nothing to do. And so we have the start of the Van Blanc story.

Van Blanc and his little brother Black Beauty are both available for hire:

https://www.goboony.co.uk/campers/united-kingdom/england/great-whelnetham/63570

https://www.goboony.co.uk/campers/united-kingdom/england/great-whelnetham/63333

We have a van, so now what?

And, come to think of it, why? There is a relationship between these questions, leading to more questions, such as who is it for? I wasn’t building it as a van for me. It was more of a hobby, or a challenge.

Getting the van home gave me a chance to see what I’d got, take some careful measurements and decide what Van Blanc would be. Interestingly, the only pictures I took in the early days were of the inside. That was to be the main battleground, and I needed to form my battle plans.

At 7m in length this Crafter is big. It’s also high, with full standing headroom, and the sliding door and the back doors are all full-height, so we had a very big blank canvas.

Clearing the ground

We could get on with the initial work without making any decision on the intended layout. Having been used as a works van for climbing-frame construction, there was a lot of stuff to be cleared out. Most of it was rubbish, but some of the hundreds of screws retrieved were recycled. Once the dirt was out it was time to remove the floor, the wall lining and the bulkhead. Much of this was useless, but some of the ply lining has found its way back into the build. Most of this preparation phase was relatively straight-forward. Removal of the bulkhead was a bit of a struggle because some of the fixing bolts were difficult to get at, and removing the floor was certainly challenging. Some of the bolts had to be drilled out, and even when the all the fixings had been removed, the ply floor was well stuck down to the van.

When we eventually got there, we found a lot of space, some water leaks, but a basically sound platform to work on. In the next episode we move on to a decision on the layout, and the conversion process begins.

To see the next step on the journey click here https://www.cliffdive.co.uk/if-you-fail-to-plan/