Installing an inverter in my Pilote motorhome

Having installed the electrics in my son’s VW I decided to add an inverter to my own Pilote motorhome. Up to now we’ve used a little portable inverter plugged into a 12V socket when I needed mains voltages while off grid (I like my electric toothbrush). I wanted something just a little more powerful and less inconvenient to deploy.

I initially fancied using automatic switching so that the inverter would feed all my existing 13A sockets when off grid and switch them to hookup when available. But on my van I’d need some clever wiring to avoid the inverter trying to charge its own battery via the built-in charger (which really wouldn’t be a good thing), so I settled for “keep it simple” and gave the inverter its own dedicated sockets instead.

Almost complete – testing it’ll power a little kettle

I used a 1,000W pure sine wave inverter from Renogy. It has an idle current of 1A, so it’s best to turn it off when not needed – the supplied remote switch facilitates that. The inverter fits nicely under the bench with the battery and solar controller. The sockets are conveniently on the front of the bench so there’s no nasty cable routeing involved.

Tests show it can power our travel kettle and travel hairdryer – but not at the same time! The only downside so far is that in the most convenient orientation the label is upside down – it’s under the seat, but I still know it’s there!

Further reading

Campervan conversion on a VW Transporter

Read previous post:
Cambridge Half 2021

It was the tenth time the Cambridge Half has been run in its current form, and the tenth time I've...

Close